
LEDGEAR® C9, the most compact design DALI-2 looping LED driver in the world, which covering all the wattage within 15W(350mA) for indoor lighting, especially suitable for cut out hole no less than 66mm, and bigger but with small ceiling void.
The driver equipped with push-fit terminals, which enable through wiring of Primary, DALI and Push wires throughout the driver, and save lots of time and effort on a site’s actual wiring work. The terminals allow quick cable connections without any tool, and also support a variety of wire gauge and cable thicknesses. Assembled with 4xDIP switches, the driver allows output current selectable, or programmed any output current by DALI. Variable output voltage of 14-40V with constant current output. These wide operating windows and easy wiring for LED modules makes it super flexibility and warehouse inventory reduction.
Application: LED downlights, led track lights, led decorative luminaires, and other indoor LED lighting applications
Features
• Dimmable by DALI-2 and Push-DIM
• Looping of Primary, DALI and Push-IM
• Constant current output independent led driver
• Adjustable output current by dip switches from 120mA to 350mA
• Easy and fast installation thanks for the tool-less design and through wiring
• Suitable for cut out diameter no less than 66mm
• Built--in with permanent memory for DALI dimming, 100,000 times memory
• Permissible AC cable 0.75-2.5mm² wire gauge
• Working Ta=-20°C ~ +40°C
• Reliable, Class II, SELV according EN 61347
• ENEC, CB, CE, SAA, C-tick Pending
• Five-year factory guarantee and lifetime technical support
Datasheet
MODEL | C916-40350DB-F | |
Output | Output voltage | 14-40V |
Rated current | 120, 160, 180, 220, 250, 280, 350 (preselected 120mA) | |
Maximum power | 14W | |
Current tolerance | ±5% | |
Flicker percentage ³ | <3% | |
Starting time | <500mS | |
Turn off time | <2.0S | |
Noise 4 | <22dB | |
Input | Voltage | Rated:220-240V; Range:200-264V; |
Frequency | Rated:50-60Hz, 0Hz; Range:47-63Hz, 0Hz; | |
Power factor | ≥0.9; (Output power ≥ 8.8W) | |
I-THD ⁵ | <15% (Output power ≥ 8.8W) | |
Efficiency ⁶ | 85% | |
Leakage current | <1mA | |
ON/OFF switches cycle | >100,000 | |
Standby power | <0.5W | |
DALI & PUSH Control | Dimming control mode | AM |
Dimming control type | DT6 | |
DALI Input Voltage | Rated:16V; Range:9.5-22.5V; | |
DALI Input (Bus) Current | Rated:1.6mA; Range:1.5-1.7mA; | |
PUSH Input Voltage | Rated:220-240Vac; Range:200-264Vac; | |
PUSH Input Frequency | Rated:50-60Hz; Range:47-63Hz; | |
Dimming Range | DALI-2: 1%-100%; Push-DIM: 1.5%-100%; | |
DALI Standard | IEC 62386-101: 2014, IEC 62386-102: 2014, IEC 62386-207: 2009, IEC 62386-209: 2009,DALI Part 150:2019 | |
Protection | Over current | Constant current limiting, recovers automatically after fault condition is removed |
Over voltage | Shut down output voltage, with auto-recovery or re-power on to recovery | |
Over temperature | Shut down output voltage, recovers automatically after temperature goes down | |
Short circuit | Constant current limiting, recovers automatically after fault condition is removed | |
Safety | Safety standards | EN61347-2-13; Design refer to TUV EN60950-1, TUV EN61347-1 |
Withstand voltage | I/P-O/P:3KVac I/P-FG:1.5KVac O/P-FG:500Vdc | |
Isolation resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500Vdc/25℃/75%RH | |
EMC emission ⁸ | EN55015B, EN55022 Class B, EN61000-3-2, EN61000-3-3 | |
EMC immunity | EN61000-4-2, EN61547, EN55024, EN-61000-4-5 | |
Environment | Ambient temperature range⁹ | -25°C ~ +50°C |
Max. case temperature(tc)10 | 90°C | |
Relative humidity range | 20% ~ 85%RH | |
Storage temperature range | -30°C ~ +75°C | |
Others | Lifetime(hrs)@tc=70℃ | >50,000H |
MTBF[MIL-HDBK-217F(ta=25℃)] | NA. | |
Glow wire test | 850°C for 5S; 650°C for 30S | |
Dimension L x W x H | 87.5 x 60 x 27.5mm | |
Warranty years | 5 years | |